Baxi fault code
Baxi E133: gas supply interrupted or ignition failed
Try the checks, then call an engineerChecked against 3 sources ยท Updated November 2026
The boiler couldn't light, usually because gas isn't getting through. Baxi says this code can also appear when the condensate pipe has frozen.
Safe checks you can do
- Check you have gas. Try the hob or another gas appliance. If nothing works, check the lever on the gas meter is in line with the pipe (that means on) and, on a prepayment meter, that you have credit.
- Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
- Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this
Common causes
- Prepayment meter out of credit, or meter turned off
- A frozen condensate pipe in cold weather
- A gas supply fault
- A faulty ignition part
When to call an engineer
If your gas is working and the pipe isn't frozen, a repeat E133 needs a Gas Safe engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Baxi E133 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Baxi boiler
Press and hold the reset button for one to three seconds, or until the boiler restarts. On older dial models, turn the selector to reset and hold it for about five seconds. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.