Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Worcester Bosch fault code

Worcester Bosch A21: lost signal from wireless thermostat

You can usually fix this

Checked against 1 source ยท Updated November 2026

What it means

The boiler has lost the radio link to your wireless thermostat, so it doesn't know whether to heat. This is not a gas fault.

Safe checks you can do

  1. Change the thermostat batteries. Wireless thermostats lose their link when the batteries run low. Fit new ones and re-enter your settings if needed.
  2. Move the thermostat closer to the boiler. Bring the thermostat nearer the receiver to test the signal. If the code clears, the thermostat was out of range or blocked by walls or metal.

Common causes

  • Flat thermostat batteries
  • The thermostat is out of range of the receiver
  • Interference from other wireless devices
  • A faulty thermostat or receiver

When to call an engineer

If new batteries and moving the thermostat don't work, an engineer or electrician can move the receiver or fit a wired thermostat.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Worcester Bosch A21 myself?

Usually, yes. It's normally something you can sort yourself with the checks on this page.

How to reset a Worcester Bosch boiler

Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.